Outperforms Abrasive Saws 14:1
Not only is it faster, safer and more accurate, the R355CPS chop saw is more economical. Save time and save money with every smooth, square cut you make.
Huge Cut Capacities
Cut up to 4-3/4 inch square tube, 3-3/4 inch x 7-1/8 inch rectangle tube and Ø5-1/8 inch round tubes.
Clamp, Chop, Repeat
Adjustable 3-position, rear fence, and a fast action vise clamp with a 'V' block to support round tube, allows miter cuts to be made from 0° - 45° in seconds.
Accurate, Reliable & Powerful
15A Hi-torque gearbox & blade system, increases motor life & blade-life. Heavy duty, pressed-steel base and rubber feet reduces vibration and increases cutting performance.
Cold Cut Technology
Unlike abrasives, the cut produces virtually no sparks, no dust, and no fumes, for a safer, cleaner working environment, and an accurate, square cut.
No Heat & No Burrs
Instant workable finish. Now you don't need to wait for the metal to cool after cutting. No coolant, no filing, means faster production; saving you time and money.
|Max. Rectangle Tube (0° x 0°)||3-3/4" x 7-1/8”|
|Max. Rectangle Tube (0° x 45°)||3-1/8" x 4-3/8”|
|Max. Square Tube Cut (0° x 0°)||4-3/4" x 4-3/4"|
|Max. Square Tube Cut (0° x 45°)||3-1/2" x 3-1/2"|
|Max. Round Tube Cut (0° x 0°)||5-1/8" Ø|
|Max. Round Tube Cut (0° x 45°)||4-1/8" Ø|
|Mild Steel Plate - Max. Thickness||1/4"|
|Mild Steel Box Section - Max. Wall Thickness||1/8"|
|Minimum Cut Off Piece Length||5/16"|
|Blade Dia.:||14 in.|
|No. of Teeth:||36|
|Motor (120V 60Hz):||15A|
|Speed No Load:||1450rpm|
18-1/2 x 22-5/8 x 14-3/4 Inch
16-1/8 x 20-7/8 x 12-1/4 Inch
|14” Multi-Material Cutting TCT Blade (Fitted)|
|5/16" (8mm) (Blade Change) Allen Key|
|Wood||Hardwood & tanalised decking, MDF laminates, mouldings, reclaimed wood with nails, scaffold boards & poles, stud-work.|
|Ferrous Metal||Mild Steel, angled, box section, square tube, metal stud dry walling, rebar, RSJs, plate (1/4 inch), unistrut.|
|Non-Ferrous Metal||Aluminum, armoured cables, cable tray, copper, floor edgings, roof flashings, stair nosings.|
|Plastic||Electrical conduit, plastic pipes, plexiglas, rubber & reinforced hoses, (WPC) Wood Plastic Composites.|
|Not Recommended||Hardened high carbon, coated and stainless steel.
Note: Cutting galvanised steel may reduce blade life.
Mild Steel, angled, box section, square tube, metal stud dry walling, rebar, RSJs, plate (1/4 inch), unistrut.
Aluminum, armoured cables, cable tray, copper, floor edgings, roof flashings, stair nosings.
Hardwood, Softwood, tanalised decking, MDF, laminates, mouldings, logs, scaffold boards, CLS, stud-work.
Wood With Nails
Reclaimed wood with embedded nails? No problem. Evolution saws will cut straight through without damaging the blade or saw.
Electrical conduit, plastic pipes, plexiglas, rubber & reinforced hoses, (WPC) Wood Plastic Composites.